Audi A4/S4/RS4 2002-2008 Autoradio GPS Aftermarket Android Head Unit Navigation Car Stereo
Audi A4/S4/RS4 2002-2008 Android OS Car DVD Player is specially designed to replace Audi A4/S4/RS4 factory standard radio or RNS-E Navigation system. It has the same plug and harness as original radio, totally plug and play. Support original BOSE sound system and steering wheel control.
Audi A4 2002, 2003, 2004, 2005, 2006, 2007, 2008
Audi S4 2002, 2003, 2004, 2005, 2006, 2007, 2008
Audi RS4 2002, 2003, 2004, 2005, 2006, 2007, 2008
Note above year range is for your reference only. Send a photo of the dashboard(radio system) of your vehicle to firstname.lastname@example.org to verify the fitness if you are not sure about fitness.
Fit for Audi A4/S4/RS4 with Chorus ii+/Concert ii+/Symphony i/Symphony ii/Symphony ii+/BNS 5.0/RNS-D/RNS-E head unit.
NOT FIT FOR Audi A4/S4/RS4 with Chorus i/Concert i/Chorus ii/Concert ii/Concert iii/Symphony iii/BNS 4.0/MMI/AMI.
Factory radio FYI:
|Operating system||Android Q(10)|
|CPU||64-Bit 8-Core Cortex-A53 1.5GHz|
|Display||7" 1024*600 Capacitive Touch Screen|
|SD card||Two micro sd card slots|
|USB port||Two USB ports|
|Amplifier||Built-in 4*45W sound amplifier|
|Audio Output||Front left, Front right, Rear left, Rear right and Subwoofer(RCA port)|
|Video Output||One video output(RCA port)|
|Audio/Video Input||Left/Right audio and video input(RCA port)|
|Camera Input||One camera input(RCA port)|
Built-in GPS module and external GPS antenna
Is this product plug and play? Do I need to program or code my Audi? Do I need to buy external GPS antenna? Can I still check the car info as the OEM screen?
Answer: Yes, it is totally plug and play, it has the same plugs and harness as original Audi system. You do not need to program your car when installation. All necessary accessories are included in the package. You do not need to buy anything else to make it work. You can still check the original Audi car info as before.
How do I switch the new upgrade system to the original Audi interface?
Answer: Please tap “Original” icon on the home screen to switch to original Audi interface.
How do I switch the original Audi interface to new upgrade system?
Answer: Please tap the screen.
Why it shows black screen with no signal when tap “Original” to switch back to original Audi interface?
Answer: Please check the CAR-LVDS port. Make sure you connect the LVDS plug (removed from the OEM screen) to the new screen.
Why there is no audio from new upgrade system?
Answer: 1. Please press MEDIA button on the raido panel and check audio source options.Make sure the External Audio input(AUX) is activated.
Note if your car has the AMI option instead of AUX, then you need to plug the Audi AMI-AUX cord(this cord is sold separately) to AMI port in glove box on passenger side.After plug this cord, the AMI will change to AUX on the screen.
2. Then tap the screen to access new upgrade system. You should be able to hear sound.
Where should I mount the main metal box? The original LVDS cord is too short to mount it in the glove box?
Please take apart the glove box on passenger side and there is a hole allows you to put the metal box hide behind the screen. Then the LVDS cord is long enough.
Why it does not power off when I shut down the car?
Answer: Please make sure the CANBUS connector is connected behind the climate control panel as shown below.