Menu
Your Cart

Mercedes-Benz GL-Class (X166)/ML-Class (W166) 2012-2018 Autoradio GPS Aftermarket Android Head Unit Navigation Car Stereo

Mercedes-Benz GL-Class (X166)/ML-Class (W166) 2012-2018 Autoradio GPS Aftermarket Android Head Unit Navigation Car Stereo
Hot -48 %
Mercedes-Benz GL-Class (X166)/ML-Class (W166) 2012-2018 Autoradio GPS Aftermarket Android Head Unit Navigation Car Stereo
$504
$965
  • Stock: In Stock
  • Model: 8501
  • Weight: 3.51kg
  • Dimensions: 25.00cm x 30.00cm x 22.00cm

Available Options

Aftermarket GPS Navigation Head Unit is specially designed to upgrade Mercedes-Benz GL(X166)/ML(W166) 2012-2018 factory standard radio(No Navigation System). It has the same plug and harness as original radio, totally plug and play.

Compatibility:

Mercedes-Benz GL-Class (X166) 2012, 2013, 2014, 2015, 2016
Mercedes-Benz ML-Class (W166) 2012, 2013, 2014, 2015, 2016, 2017, 2018

Note above year range is for your reference only. Please send info@sigmacarstereo.com a photo of the dashboard(radio system) of your vehicle if you are not sure about the fitness. We will check and recommend a suitable product.

Attention:

1. You can use the original command knob and touchscreen to operate the new upgrade system. 
You can use the original command knob to operate the original Mercedes-Benz NTG system. The touchscreen does not operate the original Mercedes-Benz NTG system.

2. Please check the media port in glove box on passenger side or arm rest.
If your car equips with 3.5mm AUX IN port, then our product send audio to the car via AUX port directly.
If your car equips with MI(Media Interface) port in the glove box/arm rest, please add AMI-AUX cord.

3. Installation photo as shown below, this product has two different models, if you choose 7 inch screen, it will be the same as the left photo below. If you choose 9 inch screen, it will be the same as the right photo below, the screen popup the dashboard, similar as the new GLE/GLS dashboard.

Operating system   Android Pie(10)
CPU   64-Bit 8-Core Cortex-A53 1.5GHz
RAM   8GB
Capacity   64GB
Display   7" or 9" 1024*600 Capacitive Touch Screen
Network   Wi-Fi
SD card   One micro sd card slot
USB port   Three USB ports
Camera Input   One camera input(RCA port)
Microphone    External
GPS receiver    Built-in GPS module and external GPS antenna
 

Is this product plug and play? Do I need to program or code my Mercedes-Benz? Do I need to buy external GPS antenna? Can I still check the original car info as the OEM screen?
Answer: Yes, it is plug and play, it has the same plugs and harness as original Mercedes-Benz system, not need to cut wires when install. You do not need to program/code your car when installation. All necessary accessories are included in the package. You do not need to buy anything else to make it work. You can still check the original Mercedes-Benz car info as before.


Can I operate the original Mercedes-Benz interface via touhcscreen?
Answer: NO. You can only operate the original Mercedes-Benz NTG system via the command knob as before.


Can I operate the new navigaiton system interface via command knob?
Answer: Yes. You can operate the new upgrade system via command knob.


How do I switch between the new Navigation system interface and the original Mercedes-Benz interface?
Answer: Please press “BACK” command button for 3 seconds to switch between original Mercedes-Benz interface and new navigation system.

Why does it show "No signal" or blank screen when switch to original Mercedes-Benz interface?
Answer: Please check the LVDS port. Make sure you connect the LVDS plug (removed from the original Mercedes-Benz screen, not the end from the original head unit) to the "CAR-LVDS" port on the control box.

NTG 4.0 have the 10 pin square LVDS port. NTG 4.5/4.7/5.0/5.1/5.2/5.5 have 4 pin round LVDS plug.


Why there is no audio from new upgrade system?
Answer: 

1. Please check if there is AUX IN port, AMI port or USB port on your car, usually it is in the center armrest box or glove box on passenger side.


2. If it is AUX IN port(NTG 4.0/4.5/4.7) on your car, please activate AUX mode, then switch to the upgrade ystem to get sound.
If it is AMI port(NTG 4.0/4.5/4.7) on your car, you need to buy our AMI-AUX cord and plug in the AMI port, then you will see the AUX audio option, activate AUX mode, then switch to the upgrade system to get sound.

 Why does the Sirius/XM radio, CD, original car computer info and factory camera does not display?
Answer: Please check the fiber optics plug, you need to move it from the original connector to new connector we provided.

 

Compatible accessories can be purchased at the following links:
DAB+ USB module dongle (click here)

Apple carplay/Android auto wireless (click here)

Apple carplay/Android auto wired (click here)

Car Front in-dash camera (click here)

OBD 2 diagmostic adapter (click here)

Universal car backup camera (click here)

Write a review

Note: HTML is not translated!
Bad Good